The Coremo MPA-N failsafe pneumatic caliper brake is designed for industrial applications where the clamping forces and overall dimensions required are not particularly high. The two versions, MPA-N and MPA-1N, have a nominal clamping force of 970 [N] and 2750 [N] respectively. To release the brake, an air pressure of no more than 6 [bar] is required. The brake must be installed horizontal so that the weight of the thruster does not rest on the levers. The SG iron caliper is designed to withstand the mechanical and thermal stresses generated in compliance with satisfactory safety coefficients. The lining pads can be adjusted to ensure that the friction surfaces grip the brake disc at all points.

Quality controls ensure a reliable, safe product and trouble-free caliper operation. The brake is suitable for applications where emergency, parking, holding or service stops are required.

Braking force F MPA-N 970 N MPA-1N 2750 N
Dynamic torque = F • (disc radius in m - 0.024) = Nm
Max total wear 6 mm
Thickness of new lining 5 mm
Continuous thermal capacity Qc 1 kW
Minimum release pressure 4.5 bar
The torque values specified are obtained with n. 3 springs for MPA-N n. 4 springs for MPA-1N

För reservdelar, kontrollera serienumret på din broms och skicka det till [email protected]. Med serienumret kan vi identifiera alla reservdelar du behöver.

Vi erbjuder Coremo original bromsbelägg, för mer information, kontakta oss på [email protected].