The Coremo E air-actuated pneumatic caliper brake is intended for industrial applications which require variation in the clamping forces in response to changes in the air pressure. The input air pressure must not exceed 6 [bar]. Use of this brake is recommended in particular in applications which require greater thermal capacity per unit of surface area.
The brake can be installed in any position since it has a lever balancing and lining pad alignment system.
The SG iron caliper is designed to withstand the mechanical and thermal stresses generated in compliance with satisfactory safety coefficients. The lining pads can be adjusted to ensure that the friction surfaces grip the brake disc at all points.
Quality controls ensure a reliable, safe product and trouble-free caliper operation. The brake is suitable for applications where continuous braking or service stops are required.
|Braking force F||E3 20180 N at 6 bar E4 36600 N at 6 bar|
|Dynamic torque||= F • (disc radius in m - 0.065) = Nm|
|Max total wear||12 mm|
|Thickness of new lining||13 mm|
|Continuous thermal capacity Qc||20 kW|
Download - Pneumatic Caliper Brakes Brochure.pdf
For spare parts, check the serial number printed on your brake and send it to [email protected]. With the serial number we can identify all the spare parts you need.
We offer all original brake-pads from the entire Coremo range of brakes. For more information, please contact us on [email protected].