The Coremo MPA air-actuated pneumatic caliper brake is designed for industrial applications where the clamping forces and overall dimensions required are not particularly high.

The clamping forces of this brake vary depending on the input air pressure, which must not exceed 6 [bar]. The product must be installed horizontal so that the weight of the thruster does not rest on the levers. The SG iron caliper is designed to withstand the mechanical and thermal stresses generated with satisfactory safety coefficients. The lining pads can be adjusted to ensure that the friction surfaces grip the brake disc at all points. Quality controls ensure a reliable, safe product and trouble-free caliper operation. The brake is suitable for applications where service stops are required.

Braking force F MPA 556 N at 6 bar MPA-05 1516 N at 6 bar MPA-1 3888 N at 6 bar
Dynamic torque = F • (disc radius in m - 0.024) = Nm
Max total wear 6 mm
Thickness of new lining 5 mm
Continuous thermal capacity Qc 1 kW

För reservdelar, kontrollera serienumret på din broms och skicka det till [email protected]. Med serienumret kan vi identifiera alla reservdelar du behöver.

Vi erbjuder Coremo original bromsbelägg, för mer information, kontakta oss på [email protected].