The Coremo F air-actuated pneumatic caliper brake is intended for industrial applications which require variation in the clamping forces in response to changes in the air pressure. The input air pressure must not exceed 6 [bar]. The brake can be installed in any position since it has a lever balancing and lining pad alignment system. The SG iron caliper is designed to withstand the mechanical and thermal stresses generated in compliance with satisfactory safety coefficients.

The lining pads can be adjusted to ensure that the friction surfaces grip the brake disc at all points.

Quality controls ensure a reliable, safe product and trouble-free caliper operation. The brake is suitable for applications where continuous braking or service stops are required.

Braking force F F05 1600 N a 6 bar F1 3800 N a 6 bar F2 7500 N a 6 bar F3 12700 N a 6 bar
Dynamic torque = F • (raggio del disco in m - 0.033) = Nm
Max total wear 12 mm
Thickness of new lining 11 mm
Continuous thermal capacity Qc 3.4 kW

För reservdelar, kontrollera serienumret på din broms och skicka det till [email protected]. Med serienumret kan vi identifiera alla reservdelar du behöver.

Vi erbjuder Coremo original bromsbelägg, för mer information, kontakta oss på [email protected].