The Coremo B air-actuated pneumatic caliper brake is intended for industrial applications which require variation in the clamping forces in response to changes in the air pressure. The input air pressure must not exceed 6 [bar].

The brake may be installed horizontal so that the weight of the thruster does not rest on the levers. On request, the brake can be equipped with a lever balancing system to allow vertical installation, specifying whether the thruster is to point to six o’clock (H6) or twelve o’clock (H12). The SG iron caliper is designed to withstand the mechanical and thermal stresses generated in compliance with satisfactory safety coefficients. The lining pads can be adjusted to ensure that the friction surfaces grip the brake disc at all points. Quality controls ensure a reliable, safe product and trouble-free caliper operation. The brake is suitable for applications where continuous braking or service stops are required.

Braking force F B05 670 N at 6 bar B1 1800 N at 6 bar B2 3550 N at 6 bar
Dynamic torque = F • (disc radius in m - 0.032) = Nm
Max total wear 14 mm
Thickness of new lining 16 mm
Continuous thermal capacity Qc 1.7 kW
Continuous thermal capacity for double pad version Qc 2.7 kW

För reservdelar, kontrollera serienumret på din broms och skicka det till [email protected]. Med serienumret kan vi identifiera alla reservdelar du behöver.

Vi erbjuder Coremo original bromsbelägg, för mer information, kontakta oss på [email protected].