COREMO ID 2500 N DIRECT HYDRAULIC BRAKES - SPRING-APPLIED

Art.nr: ID 2500 N

The COREMO ID 2500N hydraulic brake is operated by cup springs which generate a constant clamping force. The hydraulic operating system releases the brake by compressing the springs inside the thruster. The brake may be used as a safety brake or for parking and holding. It also has an ON/OFF inductive sensor indicating opening and closure. A wear indicator warns of the maximum lining pad wear level. The brake operating temperature is -40 [°C] to + 200 [°C].

Braking force F 150000 N
Dynamic torque = F • (disc radius m - 0.101) = Nm
Minimum release pressure 180 bar
Max pressure 220 bar
Max total wear 18 mm
Thickness of new lining 14 mm
Hydraulic fluid Mineral oil based SAE/ISO 46
Total oil displacement for 2 mm movement of each pad 0.3 dm3

For spare parts, check the serial number printed on your brake and send it to [email protected]. With the serial number we can identify all the spare parts you need.

We offer all original brake-pads from the entire Coremo range of brakes. For more information, please contact us on [email protected].

ID-2500-N