COREMO D2N-ID SPRING-APPLIED HYDRAULIC CALIPER BRAKE

Art.nr: D2N-ID

The COREMO D2N-ID spring-applied hydraulic caliper brake is operated by helical springs which generate a constant clamping force. The hydraulic operating system releases the brake by compressing the springs inside the thruster.

The brake may be used as a safety brake or as a holding and parking brake.

Braking force F D2N-ID 5600 N
Minimum release pressure 25 bar D2N-ID
Max pressure 100 bar
The torque values specified are obtained with n. 4 springs for 2N-ID
Torque proportionally less are achievable with n. 2 springs for 2N-ID
Hydraulic fluid Mineral oil based SAE/ISO 46
Total oil displacement for 2 mm movement of each pad 0.017 dm3
Dynamic torque = F • (disc radius in m - 0.033) = Nm
Max total wear 12 mm
Thickness of new lining 11 mm
Continuous thermal capacity Qc 3.4kW

For spare parts, check the serial number printed on your brake and send it to [email protected]. With the serial number we can identify all the spare parts you need.

We offer all original brake-pads from the entire Coremo range of brakes. For more information, please contact us on [email protected].

D2N-ID