Master Brake Cylinders with Hydraulic Servo

Master brake cylinders (or master cylinders) with hydraulic servo function are used when the foot is not sufficient to create a enough pressure in the brake circuits.

Our two partners for the production of the master brake cylinders with hydraulic servo are SAFIM and ATE.

The master brake cylinder with servo is used in small and medium-sized machine types, when the foot is insufficient to actuate the brake pedal with sufficient force.

Technical Features of Master Brake Cylinders with Servo

• Easy to complement and install to a pre-existing brake system.
• Maximum brake feel.
• Achieves a high brake circuit pressure with a low actuation force of the pedal.
• Components need servo pressure to act.
• Available for both mineral oil and brake fluid (glycol based).

Operating Range for the Master Cylinder with Servo

• Brake pressure 0 to 150 bar.
• Available in versions for a simple or dual-circuit system.
• From brake circuit volume of 18 up to 65 cubic centimeters.
• Can operate in the temperature range -20 to +90°C.

Extras on Request for Master Brake Cylinders

• Pressure relief valve
• Piston Valve for work brakes.
• Servo brake for variable pump.
• Master cylinder without hydraulic servo control.
• Combination of servo brake in connection with the brake cylinder.